Buy Pink Tool Belts

READ THIS FIRST before posting a question that may have already been answered. Thanks! All comments need my approval DO NOT repost if it doesn’t seem to go through. This is a tutorial to restore Seagate hard drives with BSY error (unrecognized in BIOs) and LBA=0 to normal function. This DOES NOT format your drive. All files will be accessible. Seagate’s estimate of repair for my drive = $1000 This fix = Less than $20 Donations are very much appreciated as I am voluntarily technical support on here, at the same time busy attending college and tutoring. Any amount is a blessing! relaxupload.com Many thank yous to those who donate! Your support encourages aspiring freelance pc techs like me to test out solutions, create the videos and share them with the world. Gradius2 tutorial w/ instructions relaxupload.com Simpler Instructions+Pics: relaxupload.com For those using the RS232-to-TTL adapter method: relaxupload.com ********************FAQ********************** DETSEC or Spin Up error: You need to tighten the screws or make sure the PCB is in good contact with the hard drive. No Response in Hyperterminal: GND cable is either loose/detached or connected to the wrong pin. Garbage letters, symbols: Wires are probably in contact with another (you can put a piece of paper or newspaper in between the pins to prevent them from touching. Also, check for loose wires! Arrow instead F3 T prompt: Switch RX/TX wires on the hard drive. Close Hyperterminal and create a new session again …

Comments are closed.